MODEL 470

 

NOTE:

  1. One half inch travel needed to dispense 3 c.c.
  2. To prevent leakage back from nozzle to supply bottle,
    piston must be allowed to return fully.
  3. This unit can be taken apart for servicing.
    Hold cylinder #7 and turn body #6 clockwise
    approximately ten degrees, then pull apart.

No. Quan. Description
A1 1

Model 470 Assembly
A2 1

Pump Assembly
A3 1

Nozzle Assembly
A7 1

Piston Assembly
1 1

Nozzle Nut
2 1

Tubing 6 FT
3 1

Pump Nut
4 1

Spring
6 1

Pump Body
7 1

Cylinder
9 1

"O" Ring 9/16 x 3/4 x 3/32
12 1

"E" Ring
21 1 "O" Ring 5/8 x 3/4 x 1/16
27 1 Clamp
29 1 "O" Ring 1/4 x 3/8 x 1/16
30 1 "O" Ring Retainer
31 1 Inlet Spider
32 1 Inlet Spring
R1 4 "O" Ring Repair Kit
R1 V 4 "O" Ring Repair Kit (Viton Rubber)

HIGHLAND LABS, INC.
163 Woodland Street
Holliston, MA 01746
508-429-2918 Fax 508-429-6283